How to Use
How to Use Our Product
Unlock the power of our product with these simple application methods!
- Garden Pump Sprayer Application
- Get Started: Dilute the soap and apply it to a dry surface. Let it sit for 1-2 minutes, then rinse off with a high-pressure washer—no scrubbing required!
- Dilution Rates: For an exterior wash, mix 10 oz to 12 oz of soap with 1 gallon of water. Adjust the soap amount based on the dirt level and how long it’s been on the vehicle.
- Foam Cannon Application
- For Best Results: Use a gas pressure washer with a minimum of 3000 PSI to create thick, luxurious foam.
- Dilution Rates: Mix 6 oz to 8 oz of soap with 24 oz of water. Apply the foam to a dry vehicle, let it dwell for 2-3 minutes, then rinse with a high-pressure washer—no brushing needed!
- Special Considerations for Untreated Aluminum
- If you’re washing untreated aluminum surfaces, be sure to rinse the solution within 30 seconds with a high-pressure washer to prevent any reaction. Untreated, uncoated aluminum can react to any type of cleaning chemicals, so we advise against using our product on polished, untreated (raw mirror shine) aluminum. It’s completely safe on clear-coated aluminum, though!
- Safety Tip
- Our product boasts exceptional degreasing and dirt removal capabilities. For your safety, remember to wear latex or nitrile gloves to keep your hands protected.
If you have any questions or need further assistance, feel free to reach out—we're here to help!