How to Use
How to Use Our Product
Unlock the power of our product with these simple application methods!
- Pump Sprayer Application
- Get Started: Dilute the soap and apply it to a dry surface. (just make sure the surface is not too hot) If so, let it cool down first. Let it sit for 1-2 minutes, then rinse off with a high-pressure washer—no scrubbing required!
- Dilution Rates: For an exterior wash, mix 10 oz to 12 oz of soap with 1 gallon of water. Adjust the soap amount based on the dirt level and how long it’s been on the vehicle.
- Foam Cannon Application
- For Best Results: Use a gas pressure washer with a minimum of 3000 PSI to create thick, luxurious foam.
- Dilution Rates: Mix 8 oz of soap with 24 oz of water. Apply the foam to a dry vehicle (just make sure the surface is not too hot). If so, let it cool down first. Let it dwell for 2-3 minutes, then rinse with a high-pressure washer—no scrubbing needed!
- Special Considerations for Untreated Aluminum
- Untreated, uncoated raw aluminum can react to any type of cleaning chemicals, so we advise against using our product on polished, untreated (raw mirror shine) aluminum. It’s completely safe on clear-coated aluminum and regular aluminum!
- Safety Tip
- Our product boasts exceptional degreasing and dirt removal capabilities. For your safety, remember to wear latex or nitrile gloves to keep your hands protected.
If you have any questions or need further assistance, feel free to reach out—we're here to help!